
The details
A closer look
-
White linen shadeA cylinder shade on a tubular arm, shown in aged iron
-
Rectangular backplate127 × 76 mm, shown in aged iron
-
Burnished brassShown without the shade; also in polished nickel
Size and placement
Get the height right
Typical mounting heights. Your electrician will confirm the final position.
-
Either side of a mirror
Centre the backplates about 1.5 to 1.65 m from the floor and 900 to 1000 mm apart, or just outside the mirror frame.
-
Hallway
Allow about 2.4 to 3 m between sconces along a hall.
-
Narrow halls
It sits only 143 mm off the wall, so it suits tight halls and stairways.
Specifications
| Width | 102 mm |
|---|---|
| Height | 359 mm |
| Projection from wall | 143 mm |
| Backplate | 127 × 76 mm |
| Weight | 0.6 kg |
| Shade | White linen fabric |
| Lamp | 1 × E12 candle, max 60 W (LED recommended) |
| Location | Indoor, including bathrooms (US damp rated) |
| Electrical | Converted to 230 V for NZ. Supplier Declaration of Conformity available on request |
| Model numbers | EW1001AI, EW1001BBS, EW1001PN |
Overview
Size:
102mm Wide x 359mm High x 143mm Deep
Light:
1x max 60W E12 Specialty Lamp
Finish:
Aged Iron, Burnished Brass or Polished Nickel Finish
with White Linen Fabric Shade
Brianna wall sconces include cylindrical shades in fresh White Linen. Available in rich, gilded Burnished Brass and the more contemporary Polished Nickel finish. Install a dimmer switch for a warm glow effect and easily change the look and feel of the room. Designed for damp and dry environments.
Ready to light up on day one?
This fixture uses a specialised E12 base bulb, which isn't standard at local supermarkets or hardware stores. Add your E12 light bulbs and we’ll bundle everything together so it's ready to light up on delivery day!
Downloads
- Spec sheet, Aged Iron (PDF)
- Spec sheet, Burnished Brass (PDF)
- Spec sheet, Polished Nickel (PDF)
- Install guide (PDF)
- Full-size paper mounting template (PDF)
These are the supplier's US documents. Your light is converted to 230 V for New Zealand.
Delivery and installation
In-stock showroom items are usually dispatched the next working day. Warehouse items are dispatched within 5 to 10 working days. Delivery is free on orders over $499 to most New Zealand addresses; oversized items are charged at our oversized rate. Shipping policy
Hardwired lights must be installed by a licensed electrician.
Uses
Where Brianna works best
-
01
Either side of a mirror
It's US damp rated, so a pair suits a bathroom mirror.
-
02
Hallways
At 102 mm wide, it suits narrow walls.
-
03
Bedside
On a dimmer, the linen shade gives a warm, low glow.
Good to know
Questions customers ask
Quick answers before you buy.
Which bulb does it take?
One E12 candle bulb. E12 is the US candle size, a little smaller than the E14 bulbs common in New Zealand, so standard NZ candle bulbs won't fit. We stock E12 LED bulbs to suit.
Can it go in a bathroom?
Yes. It's US damp rated, which suits bathrooms outside the wet zones. Your electrician will confirm placement against the NZ zones.
Is it suitable for New Zealand?
Yes. It is converted to 230 V for New Zealand, and a Supplier Declaration of Conformity is available on request.
Will you match a lower price?
Yes. If another authorised New Zealand retailer advertises the same product, in the same finish, for less, send us the link before you order and we will match it. The details are on our price match promise page.
Pair it with
The right bulb
The bulbs we recommend for Brianna.
About the brand
Visual Comfort
Visual Comfort is one of the world's most respected names in designer lighting, known for its collaborations with leading designers and its sculptural, beautifully finished pieces. Our collection brings together Visual Comfort Studio and Visual Comfort Generation, from refined bathroom and vanity sconces to elegant pendants, chandeliers and exterior lanterns.
Shop all Visual Comfort →